Just finished a custom sauna room in Miramar, FL. This room was made from the ground up, we were presented with a space in the master bathroom that had a drop in tub. After the tub was removed and the area cleaned, we provided the 240 volt feed required for the heater to work, once this was ready, we built the frame for the room and covered it with foil vapor barrier. The tongue and groove grade a cedar was applied to cover all the walls and ceiling of the sauna room. The floor was pre tiled so the sauna walls and bench could fall seamlessly on top of the tile and the door was done with sand blasted tempered glass for a high end look with privacy inside the sauna room. The Amerec Trend 4.5 KW Sauna Heater works perfectly for this sauna room and paired with the A30 Time and Temperature Control will guarantee many years of worry free and reliable performance.